Sleek Mpp Electric Pipe Sn24-Sn40

• Customization: Available
• After-sales Service: Online After-Sales Service
• Warranty: 1 Year
• Model NO.: DN100mm-250mm
• Material: PP
• Water Absorption: ＜0.01%
• Contraction Percentage: ＜0.4%
• Ring Stiffness: Sn24, Sn32, Sn40
• Density: 0.90-0.94
• Flattening Test: When The Deformation in The Vertical Direction of
• Bending Strength: ≥36 MPa
• Colour: to Be Agreed Upon by Supply and Demand
• Link Mode: It Is Connected by Hot Melt Butt
• Transport Package: Customized According to Customer Requirements
• Specification: According to the customer can be customized
• Trademark: Wilvida
• Origin: Jiangsu, China
• HS Code: 3917210000
• Production Capacity: 100, 000t/Year

Product Description

Product Description

 

Our MPP power pipe, the Sleek MPP Electric Pipe Sn24-Sn40, is crafted using advanced modified polypropylene. This innovative solution allows for seamless installation without the need for dredging, excavating, or disrupting road surfaces. Ideal for laying pipelines, cables, and other essential construction projects across sensitive sections such as roads, railways, buildings, and river beds.

Trenchless pipe engineering, unlike traditional digging methods, aligns perfectly with modern environmental protection standards. Traditional methods often result in dust pollution, traffic congestion, and other disturbances. In contrast, our technology enables pipeline installation even in areas where excavation is not feasible, such as heritage conservation districts, bustling urban centers, protected farmlands, highways, and riverine environments.

The Sleek MPP Electric Pipe Sn24-Sn40 boasts numerous advantages including exceptional high strength, superior high-temperature resistance, easy installation, convenient construction, and cost-effectiveness.

Detailed Photos

 

 

Product Parameters

 

MPP Cable Conduit Pipe's Parameter Datas
Norminal Diameter/IN(mm)	Norminal Wall Thickness (mm)			Norminal Lenght (mm)
	Ring Stiffness (3%) Grade (Normal Temperature)
	SN24	SN32	SN40
100	8	8	10	6000/9000
125	8	10	12
150	10	12	14
175	12	14	16
200	14	16	18
225	16	18	20
250	18	20	20

 

Certifications

 

 

 

Packaging & Shipping

 

 

Installation Instructions

 

During the installation of the MPP power cable protection tube, choosing the correct connection method is critical for ensuring the reliable operation of the power piping system. This guide introduces several common MPP power cable protection tube connection methods to help you understand the unique characteristics and ideal application scenarios for each method.

01, Before beginning the installation, verify that the power supply, hydraulic oil, and heating plate of the welding machine meet all welding requirements. Perform a test run on the milling cutter oil pump switch, etc. Attach slips that match the pipe specifications into the rack. Set the heating plate to the required welding temperature, and clean its surface with soft paper or alcohol to remove any oil stains before heating.

02, Clean both ends of the pipe to remove any dirt. Place the pipe into the frame clamp, ensuring that the extension length is equal on both ends. Support the parts outside the pipe rack with appropriate supports. Align the pipe height with the centerline of the frame, secure the slip, insert a milling cutter, and mill the pipe.

03, Continue milling until both ends of the pipe achieve continuous cutting. Release the pressure and allow the milling cutter to idle for two to three turns before retracting the movable frame and turning off the milling cutter switch.

 

04, Remove the milling cutter and bring the pipe ends together. Check the end face alignment; the displacement at both pipe ends should not exceed 10% of the pipe wall thickness. Ensure there are no obvious gaps between the pipe ends, and the gap width should adhere to: 0.3MM (DN.<25MM); If 0.5MM (225MM400MM) does not meet the requirements, it should be milled again.

05, Once the heating plate reaches the set temperature, quickly position it into the rack and apply the specified pressure until the pipe ends' circumference flips and the minimum curling meets the required height. Reduce the pressure to the specified value so that the pipe end faces contact the heating plate, and continue heating for the designated duration.

06,When the heat absorption time is complete, retract the movable frame and promptly remove the heating plate. Close the pipe ends swiftly, ensuring the switching time is minimal and within the specified limit. Avoid applying excessive pressure, as it could expel molten material and compromise welding quality.

07,Increase the pressure to the specified value and maintain it until the pipe cools naturally to room temperature. Once cooled, release the pressure, loosen the slip, and remove the pipe to complete the welding process.

 

Company Profile

 

Yangzhou Huawei Pipe Technology Co., Ltd., founded in Yangzhou, China, in 2018, is at the forefront of delivering comprehensive, intelligent pipeline system solutions.
Our flagship products encompass HDPE, PVC, PP-R, MPP, and other series, designed to excel across various sectors including construction engineering, municipal engineering, agricultural drainage and irrigation, gas transportation, home decoration, and power cable sheathing. We proudly offer nearly 3000 different varieties and specifications of pipes, fittings, and valve products, tailored to meet diverse industry needs.

Our Advantages
We are dedicated to international trade, offering customized services to pipeline dealers worldwide. To establish a cutting-edge factory, we have invested in state-of-the-art mechanical equipment. Our annual production capacity reaches an impressive 30,000 tons, efficiently filling up to 3000 containers.
Our advanced machinery and meticulous management system significantly cut costs, reduce delivery times, and ensure the superior quality of every product we manufacture.

FAQ

 

Are you a trading company or a factory?

We are a professional manufacturer, and we warmly invite you to visit our state-of-the-art factory at your convenience.

How long is your delivery time? For small quantities, we ship via international couriers (DHL, FedEx, TNT, etc.) or by air, typically taking 3-5 days after dispatch. For larger orders, we ship by sea, with delivery times ranging from days to weeks depending on your destination port.

Can you provide samples?

Yes, samples are available. For standard products, samples are free-you only need to cover the shipping costs. For high-value items, the freight and a portion of the product cost are required. Once we have an established relationship or if you are a VIP customer, samples will be provided free of charge when needed.

Do you supply OEM services?

Yes, we offer comprehensive OEM services tailored to your requirements, such as custom logos and packaging.

What are your terms of payment?

We accept TT or L/C at sight. Typically, a 30% T/T deposit is required in advance, with the balance due before shipment or via L/C.

What is your MOQ (Minimum Order Quantity)?

We accommodate orders based on customers' specific requirements.

Is it possible to use my designated label or packaging?

Yes, we are happy to use your specified labels or packaging to meet your requirements.

How can you ensure the quality of the goods you provide?

We hold honesty and responsibility as the cornerstone of our company. All products provided are thoroughly tested and come with a Certificate of Analysis (COA) before delivery, ensuring they meet the highest standards.