Compact Electric Cable Tube Sn24-Sn40

• Customization: Available
• After-sales Service: Online After-Sales Service
• Warranty: 1 Year
• Model NO.: DN100mm-250mm
• Material: PP
• Water Absorption: ＜0.01%
• Contraction Percentage: ＜0.4%
• Ring Stiffness: Sn24, Sn32, Sn40
• Density: 0.90-0.94
• Flattening Test: When The Deformation in The Vertical Direction of
• Bending Strength: ≥36 MPa
• Colour: to Be Agreed Upon by Supply and Demand
• Link Mode: It Is Connected by Hot Melt Butt
• Transport Package: Customized According to Customer Requirements
• Specification: According to the customer can be customized
• Trademark: Wilvida
• Origin: Jiangsu, China
• HS Code: 3917210000
• Production Capacity: 100, 000t/Year

Product Description

Product Description

 

Our MPP power pipe, made from premium modified polypropylene, revolutionizes the way pipelines and cables are laid. Forget about dredging, digging, and road destruction. This advanced solution is perfect for complex projects across roads, railways, buildings, and river beds.

Traditional digging methods pale in comparison to our trenchless pipe engineering, which is designed to meet modern environmental protection standards. No more dust, traffic congestion, or excavation headaches. Ideal for sensitive sites like Heritage Conservation Districts, bustling downtown areas, protected farmland, highways, and rivers, this technology ensures seamless and eco-friendly pipeline installation.

Experience the unparalleled advantages of our product: exceptional strength, superior high-temperature resistance, effortless installation, quick and convenient construction, and cost-efficiency. Discover a cutting-edge solution that sets a new benchmark in the industry.

Detailed Photos

 

 

Product Parameters

 

MPP Cable Conduit Pipe's Parameter Datas
Norminal Diameter/IN(mm)	Norminal Wall Thickness (mm)			Norminal Lenght (mm)
	Ring Stiffness (3%) Grade (Normal Temperature)
	SN24	SN32	SN40
100	8	8	10	6000/9000
125	8	10	12
150	10	12	14
175	12	14	16
200	14	16	18
225	16	18	20
250	18	20	20

 

Certifications

 

 

 

Packaging & Shipping

 

 

Installation Instructions

 

In the installation process of MPP power cable protection tube, the connection method is a very important part. The correct selection of the appropriate connection method can ensure the reliable operation of the power piping system. This section introduces several common MPP power cable protection tube connection methods to help you understand the characteristics and application scenarios of each method.

01,Before installation, check whether the power supply, hydraulic oil, and heating plate of the welding machine meet the welding requirements; Conduct an empty car test run on the milling cutter oil pump switch, etc; Install the slips that match the specifications of the pipe into the rack; Set the temperature of the heating plate to the welding temperature, and before heating, wipe the surface of the heating plate with clean soft paper or alcohol to clean its oil stains.

02,Remove dirt from both ends of the pipe. Place the pipe into the frame clamp so that the length of the extension at both ends is equal. The parts outside the pipe rack should be supported by supports. Place the pipe at the same height as the centerline of the frame, and then secure the slip. Insert a milling cutter and mill the pipe.

03,After milling the pipe until continuous cutting occurs at both ends of the pipe, remove the pressure and let the milling cutter idle for two or three weeks before retracting the movable frame and turning off the milling cutter switch.

 

04,Take out the milling cutter and close the pipes at both ends. Check the end face, and the displacement of both ends of the pipe should not exceed 10% of the pipe wall thickness. When closing, there should be no obvious gap between the two end faces of the pipe, and the gap width should comply with: 0.3MM (DN<25MM); If 0.5MM (225MM400MM) does not meet the requirements, it should be milled again.

05,When the temperature of the heating plate reaches the set value, quickly place it into the rack and apply the specified pressure until the circumference of the pipe ends is flipped and the minimum curling reaches the specified height. Reduce the pressure to the specified value, so that the end face of the pipe is in contact with the heating plate, and continue heating until the specified time.

06,When the heat absorption time reaches the specified value, retract the movable frame and quickly remove the heating plate. Close the two pipe ends, and the switching time should be as short as possible, not exceeding the specified value. The closing pressure should not be too high, otherwise it will squeeze out the molten material and cause a decrease in welding quality.

07,Raise the pressure to the specified value and maintain pressure for cooling. After natural cooling to room temperature, release the pressure, loosen the slip, remove the pipe, and complete the welding.

 

Company Profile

 

Established in the heart of Yangzhou, China, in 2018, Yangzhou Huawei Pipe Technology Co., Ltd. is your trusted partner for comprehensive intelligent pipeline system solutions.
Our diverse product range includes HDPE, PVC, PP-R, MPP, and many more, tailored for various applications such as construction engineering, municipal projects, agricultural drainage and irrigation, gas transport, home decor, and power cable sheathing. With nearly 3000 different varieties and specifications of pipes, fittings, and valve products, we cater to all your needs.

Our Advantages
Dedicated to international trade, we offer bespoke services to pipeline dealers worldwide. To support this, we have invested significantly in state-of-the-art mechanical equipment, enabling us to produce up to 30,000 tons annually, which equates to filling 3000 containers.
Our cutting-edge machinery and exemplary management system help us minimize costs, accelerate delivery times, and uphold the highest product quality standards.

FAQ

 

Are you a trading company or a factory?

We are a professional manufacturer and warmly welcome you to visit our factory at your convenience.

How long is your delivery time? For small quantity orders, we use international couriers (DHL, FedEx, TNT, etc.) or air freight, typically taking 3-5 days for delivery. For larger orders, we ship by sea, with delivery times ranging from days to weeks depending on the destination port.

Can you provide samples?

Yes, samples are available. For standard products, samples are free; you only need to cover the freight. For high-value products, you need to pay both the freight and a certain product cost. Once we have established a cooperative relationship or you become a VIP customer, we will offer free samples as needed.

Do you offer OEM services?

Yes, we provide OEM services tailored to your requests, including logo and packaging customization.

What are your terms of payment?

Our payment terms are TT or L/C at sight. For T/T, 30% is required in advance, with the balance due before shipment or via L/C.

What is your Minimum Order Quantity (MOQ)?

We accommodate the MOQ based on customer requests.

Can I use my own label or packaging?

Yes, we can use your designated label or packaging as per your requirements.

How do you ensure the quality of the goods you offer?

We uphold honesty and responsibility as our core values. Therefore, all products we provide are guaranteed to be of high quality. We test the goods and provide a Certificate of Analysis (COA) before delivery.