Reliable Sn24-Sn40 Electric Cable Pipe

• Customization: Available
• After-sales Service: Online After-Sales Service
• Warranty: 1 Year
• Model NO.: DN100mm-250mm
• Material: PP
• Water Absorption: ＜0.01%
• Contraction Percentage: ＜0.4%
• Ring Stiffness: Sn24, Sn32, Sn40
• Density: 0.90-0.94
• Flattening Test: When The Deformation in The Vertical Direction of
• Bending Strength: ≥36 MPa
• Colour: to Be Agreed Upon by Supply and Demand
• Link Mode: It Is Connected by Hot Melt Butt
• Transport Package: Customized According to Customer Requirements
• Specification: According to the customer can be customized
• Trademark: Wilvida
• Origin: Jiangsu, China
• HS Code: 3917210000
• Production Capacity: 100, 000t/Year

Product Description

Product Description

 

The MPP power pipe, crafted with premium modified polypropylene, offers a groundbreaking solution for modern infrastructure. This innovation eliminates the need for dredging, digging, and damaging road surfaces, streamlining the process of laying pipelines, cables, and other critical projects. Perfect for challenging sections such as roads, railways, buildings, and river beds, it sets a new standard in construction efficiency.

When compared to traditional methods, trenchless pipe engineering emerges as a superior choice, particularly in terms of environmental sustainability. Unlike the conventional 'digging method,' which often results in dust, traffic congestion, and other disruptions, this cutting-edge technology ensures smooth operations. It proves invaluable in sites where excavation work is not feasible, such as heritage conservation districts, bustling downtown areas, protected farmland, highways, and rivers.

This advanced solution boasts numerous advantages: exceptional strength, impressive high-temperature resistance, effortless installation, seamless construction, and cost-effectiveness, making it an indispensable asset for modern infrastructure projects.

Detailed Photos

 

 

Product Parameters

 

MPP Cable Conduit Pipe's Parameter Datas
Norminal Diameter/IN(mm)	Norminal Wall Thickness (mm)			Norminal Lenght (mm)
	Ring Stiffness (3%) Grade (Normal Temperature)
	SN24	SN32	SN40
100	8	8	10	6000/9000
125	8	10	12
150	10	12	14
175	12	14	16
200	14	16	18
225	16	18	20
250	18	20	20

 

Certifications

 

 

 

Packaging & Shipping

 

 

Installation Instructions

 

During the installation process of the MPP power cable protection tube, selecting the proper connection method is paramount. This ensures the reliable operation of the entire power piping system. This section delves into various common connection methods for MPP power cable protection tubes, aiding your understanding of their unique characteristics and optimal application scenarios.

01. Prior to installation, ensure that the power supply, hydraulic oil, and heating plate of the welding machine meet the necessary welding requirements. Conduct a test run on the milling cutter oil pump switch. Install the slips matching the pipe's specifications into the rack. Set the heating plate temperature to the welding temperature, and clean its surface with soft paper or alcohol to remove oil stains before heating.

02. Clean both ends of the pipe. Position the pipe into the frame clamp, ensuring equal extension lengths at both ends. Support the parts outside the pipe rack with appropriate supports. Align the pipe height with the frame's centerline, secure the slip, insert a milling cutter, and mill the pipe.

03. Mill the pipe until continuous cutting occurs at both ends, then release the pressure and let the milling cutter idle for two or three revolutions. Retract the movable frame and turn off the milling cutter switch.

 

04. Remove the milling cutter and close the pipes at both ends. Inspect the end faces to ensure the displacement of both ends does not exceed 10% of the pipe wall thickness. When closing, there should be no noticeable gap between the two pipe end faces, with a gap width adhering to: 0.3MM (DN.<25MM); If 0.5MM (225MM400MM) does not meet the requirements, it should be milled again.

05. Once the heating plate reaches the set temperature, quickly situate it into the rack and apply the specified pressure until the pipe ends' circumference flips, reaching the minimum curling height. Reduce the pressure so the pipe's end face contacts the heating plate, continuing to heat until the specified time elapses.

06.When the heat absorption time is met, retract the movable frame and swiftly remove the heating plate. Close the two pipe ends as quickly as possible, not exceeding the specified switching time. Ensure the closing pressure is not too high to avoid squeezing out molten material, which could compromise welding quality.

07.Raise the pressure to the specified value and maintain it for cooling. After natural cooling to room temperature, release the pressure, loosen the slip, remove the pipe, and complete the welding process.

 

Company Profile

 

Yangzhou Huawei Pipe Technology Co., Ltd. was founded in the vibrant city of Yangzhou, China, in 2018. Our commitment is to deliver comprehensive and intelligent pipeline system solutions that exceed expectations.
Our extensive product range features HDPE, PVC, PP-R, MPP, and other high-quality series. These are extensively utilized in construction engineering, municipal projects, agricultural drainage and irrigation, gas transportation, home décor, power cable sheathing, and numerous other fields. We proudly offer nearly 3000 distinct varieties and specifications of pipes, fittings, and valve products to meet diverse needs.

Our Advantages
We are steadfastly dedicated to international trade, providing pipeline dealers worldwide with meticulously customized services. To create a state-of-the-art manufacturing facility, we have made substantial investments in specialized mechanical equipment. Our impressive annual output reaches 30,000 tons, equivalent to filling 3,000 containers.
With our superior machinery and exceptional management system, we effectively reduce costs, expedite delivery times, and guarantee the unrivaled quality of every product we manufacture.

FAQ

 

Are you trading company or factory?

We are a professional manufacturer and welcome you to visit our factory at your convenience.

How long is your delivery time? For small quantity orders, products will be delivered to you by international courier (DHL, FedEx, TNT, etc.) or by air. Generally, it takes 3-5 days for the goods to reach you after dispatch. For larger quantities, delivery is by sea. The transit time varies from several days to weeks, depending on the destination port.

Can you provide samples?

Yes, samples are available. For standard products, samples are free; you only need to cover the freight. For high-value products, freight and a certain product cost apply. Once we've established a relationship or you become a VIP customer, free samples will be offered upon request.

Do you supply OEM service?

Yes, we offer OEM services tailored to your requirements, including customization of LOGO, packaging, and more.

What are your terms of payment?

Payment terms include T/T or L/C at sight. Typically, T/T 30% in advance, with the balance due before shipment or by L/C.

What is your MOQ?

We accommodate minimum order quantities as per customers' requests.

Is it possible to use my appointed label or package?

Yes, we can accommodate your labeling or packaging requirements if needed.

How can you guarantee the goods you offer are qualified?

We firmly believe that honesty and responsibility are the foundation of our company. Therefore, all products we provide are of high quality. We conduct thorough testing and provide a Certificate of Analysis (COA) before delivery.