Efficient PVC Electric Power Tube

• After-sales Service: Online After-Sales Service
• Warranty: 1 Year
• Material: PP
• Water Absorption: ＜0.01%
• Contraction Percentage: ＜0.4%
• Ring Stiffness: Sn24, Sn32, Sn40
• Model NO.: DN100mm-250mm
• Density: 0.90-0.94
• Flattening Test: When The Deformation in The Vertical Direction of
• Bending Strength: ≥36 MPa
• Colour: to Be Agreed Upon by Supply and Demand
• Link Mode: It Is Connected by Hot Melt Butt
• Transport Package: Customized According to Customer Requirements
• Specification: According to the customer can be customized
• Trademark: Wilvida
• Origin: Jiangsu, China
• HS Code: 3917210000
• Production Capacity: 100, 000t/Year

Product Description

Product Description

The MPP Power Pipe, crafted with advanced modified polypropylene, revolutionizes infrastructure development. This innovative solution eliminates the need for dredging, digging, and disrupting road surfaces, seamlessly enabling the installation of pipelines, cables, and other essential utilities in challenging environments such as roads, railways, buildings, and riverbeds.

Compared to the traditional 'digging method,' trenchless pipe engineering aligns perfectly with modern environmental protection standards. While conventional construction generates dust, traffic congestion, and other disturbances, our cutting-edge technology circumvents these issues, allowing for seamless installation in areas where excavation is impractical or prohibited, including heritage conservation zones, bustling city centers, protected farmlands, highways, and rivers.

Our product boasts a myriad of benefits: exceptional strength, superior high-temperature resistance, effortless installation, convenient construction, and cost-effectiveness. These advantages make the Efficient PVC Electric Power Tube an indispensable choice for your next infrastructure project.

Detailed Photos

Product Parameters

MPP Cable Conduit Pipe's Parameter Datas
Norminal Diameter/IN(mm)	Norminal Wall Thickness (mm)			Norminal Lenght (mm)
	Ring Stiffness (3%) Grade (Normal Temperature)
	SN24	SN32	SN40
100	8	8	10	6000/9000
125	8	10	12
150	10	12	14
175	12	14	16
200	14	16	18
225	16	18	20
250	18	20	20

Certifications

Packaging & Shipping

Installation Instructions

In the installation process of MPP power cable protection tube, the connection method is a critically important component. A well-chosen connection method ensures the reliable operation of the power piping system. This section outlines several common MPP power cable protection tube connection methods to help you understand their unique characteristics and appropriate application scenarios.

01. Before installation, check if the power supply, hydraulic oil, and heating plate of the welding machine meet the welding requirements. Conduct an empty car test run on the milling cutter oil pump switch, etc. Install the slips that match the pipe's specifications into the rack. Set the heating plate's temperature to the welding temperature, and before heating, wipe the heating plate's surface with clean soft paper or alcohol to remove any oil stains.

02. Remove dirt from both ends of the pipe. Place the pipe into the frame clamp, ensuring the extensions at both ends are equal. Parts outside the pipe rack should be supported by supports. Position the pipe at the same height as the frame's centerline, then secure the slip. Insert a milling cutter and mill the pipe.

03. Mill the pipe until continuous cutting occurs at both ends. Remove the pressure and allow the milling cutter to idle for two or three cycles before retracting the movable frame and turning off the milling cutter switch.

04. Remove the milling cutter and close the pipes at both ends. Check the end faces; the displacement of both ends of the pipe should not exceed 10% of the pipe wall thickness. When closing, there should be no visible gap between the two end faces of the pipe. The gap width should comply with 0.3MM (DN.<25MM); If 0.5MM (225MM400MM) does not meet the requirements, it should be milled again.

05. When the heating plate reaches the set temperature, quickly place it into the rack and apply the specified pressure until the circumference of the pipe ends flips and the minimum curling reaches the designated height. Reduce the pressure to the specified value, allowing the end face of the pipe to contact the heating plate, and continue heating for the specified duration.

06.When the heat absorption time reaches the specified value, retract the movable frame and quickly remove the heating plate. Close the two pipe ends as swiftly as possible, not exceeding the specified switching time. Ensure the closing pressure is not too high to prevent squeezing out molten material, which can degrade welding quality.

07.Increase the pressure to the specified value and maintain it during cooling. After natural cooling to room temperature, release the pressure, loosen the slip, remove the pipe, and complete the welding process.

Company Profile

Founded in the historic city of Yangzhou, China, in 2018, Yangzhou Huawei Pipe Technology Co., Ltd. has rapidly emerged as a pioneer in delivering one-stop, intelligent pipeline system solutions.
Our extensive product range encompasses HDPE, PVC, PP-R, MPP and other series, providing versatile applications in construction engineering, municipal projects, agricultural drainage and irrigation, gas transportation, home decor, power cable sheathing, and beyond. With an impressive catalog of nearly 3000 different varieties and specifications, our offerings include pipes, fittings, and valve products suited to myriad needs.

Our Advantages
We are committed to excelling in international trade, offering customized services to pipeline dealers worldwide. Our significant investments in advanced mechanical equipment reflect our dedication to building a modern manufacturing facility. Boasting an impressive annual production capacity of 30,000 tons, we have the capability to fill 3,000 containers.
Our state-of-the-art machinery combined with our stellar management system ensures reduced costs, expedited delivery times, and uncompromising quality in every product we produce.

FAQ

Are you a trading company or a manufacturing factory?

We are a professional manufacturer, and we warmly welcome you to visit our factory at your convenience.

What is your delivery time? For small quantity orders, we use international couriers (DHL, FedEx, TNT, etc.) or air shipping, typically taking 3-5 days for delivery. For larger quantity orders, we ship by sea, with delivery times ranging from a few days to several weeks, depending on the destination port.

Can you provide samples?

Yes, we provide samples. For standard products, samples are free, with you only covering the shipping cost. For high-value products, you will need to bear the shipping and a portion of the product cost. Once we establish a long-term relationship or if you become a VIP customer, we offer free samples upon request.

Do you offer OEM services?

Yes, we provide OEM services based on your requirements, including customized logos, packaging, etc.

What are your payment terms?

Our payment terms are either T/T or L/C at sight. For T/T, a 30% advance payment is required, with the remaining balance due before shipment, or payment can be made via L/C.

What is your Minimum Order Quantity (MOQ)?

We accommodate customers' requests regarding MOQ.

Can I use my own appointed label or packaging?

Yes, we can use your specified label or packaging upon request.

How do you ensure the quality of the goods you provide?

We believe that honesty and responsibility are the foundation of a company. All products we supply are fully qualified. We conduct thorough testing and provide a Certificate of Analysis (COA) before delivery.