Efficient PVC Conduit for Cables

• Customization: Available
• After-sales Service: Online After-Sales Service
• Warranty: 1 Year
• Model NO.: DN100mm-250mm
• Material: PP
• Water Absorption: ＜0.01%
• Contraction Percentage: ＜0.4%
• Ring Stiffness: Sn24, Sn32, Sn40
• Density: 0.90-0.94
• Flattening Test: When The Deformation in The Vertical Direction of
• Bending Strength: ≥36 MPa
• Colour: to Be Agreed Upon by Supply and Demand
• Link Mode: It Is Connected by Hot Melt Butt
• Transport Package: Customized According to Customer Requirements
• Specification: According to the customer can be customized
• Trademark: Wilvida
• Origin: Jiangsu, China
• HS Code: 3917210000
• Production Capacity: 100, 000t/Year

Product Description

Product Description

 

Our MPP power pipe is crafted from modified polypropylene, a superior material that allows for seamless installation without the need for dredging, digging, or damaging road surfaces. It is ideal for laying pipelines, cables, and other construction projects in challenging sections like roads, railways, buildings, and river beds.

Unlike traditional digging methods, our trenchless pipe engineering is a game-changer for environmental protection. Traditional construction often leads to dust, traffic congestion, and other disruptive factors. Our technology circumvents these issues, making it possible to lay pipelines even in sensitive areas like heritage conservation districts, downtown regions, crop protection areas, highways, and river beds.

Our product boasts numerous advantages, including exceptional high strength, impressive high-temperature resistance, ease of installation, convenient construction, and cost-effectiveness.

Detailed Photos

 

 

Product Parameters

 

MPP Cable Conduit Pipe's Parameter Datas
Norminal Diameter/IN(mm)	Norminal Wall Thickness (mm)			Norminal Lenght (mm)
	Ring Stiffness (3%) Grade (Normal Temperature)
	SN24	SN32	SN40
100	8	8	10	6000/9000
125	8	10	12
150	10	12	14
175	12	14	16
200	14	16	18
225	16	18	20
250	18	20	20

 

Certifications

 

 

 

Packaging & Shipping

 

 

Installation Instructions

 

The connection method during the installation of MPP power cable protection tubes is crucial for ensuring the reliable operation of the power piping system. Proper selection of the connection technique can significantly enhance system dependability. This section introduces several common MPP power cable protection tube connection methods, offering insight into their characteristics and application scenarios.

01. Prior to installation, ensure the welding machine's power supply, hydraulic oil, and heating plate meet welding standards. Perform an empty test run on the milling cutter oil pump switch, etc. Insert the slips that correspond to the pipe's specifications into the rack. Set the heating plate to the designated welding temperature, and clean its surface with clean soft paper or alcohol to remove any oil stains before heating.

02. Clean both ends of the pipe from any dirt. Place the pipe into the frame clamp, ensuring equal extension lengths at both ends. Support parts outside the pipe rack adequately. Align the pipe height with the frame's centerline, then secure the slip. Insert the milling cutter and proceed to mill the pipe.

03. Continue milling until continuous cutting is achieved at both pipe ends. Release the pressure and allow the milling cutter to idle for two or three cycles before retracting the movable frame and turning off the milling cutter switch.

 

04. Remove the milling cutter and bring the pipe ends together. Inspect the end face alignment, ensuring the displacement at both ends does not exceed 10% of the pipe wall thickness. The pipe ends should close without any significant gaps, adhering to the gap width standard: 0.3MM (DN.<25MM); If 0.5MM (225MM400MM) does not meet the requirements, it should be milled again.

05. Once the heating plate reaches the set temperature, quickly place it into the rack and apply the specified pressure until the pipe end circumference flips and the minimum curling reaches the designated height. Reduce the pressure to the specified value, allowing the pipe end face to contact the heating plate. Continue heating until the specified time is reached.

06.When the heat absorption time is met, retract the movable frame swiftly, and remove the heating plate. Close the pipe ends immediately, keeping the switching time minimal, within the specified limit. Ensure the closing pressure isn't excessively high to avoid squeezing out molten material, which would degrade welding quality.

07.Increase the pressure to the specified level and maintain it during the cooling process. Once naturally cooled to room temperature, release the pressure, loosen the slip, and remove the pipe, completing the welding process.

 

Company Profile

 

Founded in 2018 in the vibrant city of Yangzhou, China, Yangzhou Huawei Pipe Technology Co., Ltd. is a beacon of innovation, committed to delivering holistic, intelligent pipeline system solutions.
Our extensive product range includes HDPE, PVC, PP-R, MPP, and other high-performance series, making them indispensable in construction engineering, municipal projects, agricultural drainage and irrigation, gas transportation, home decoration, and power cable sheathing. With nearly 3000 diverse varieties and specifications of pipes, fittings, and valve products, we cater to a wide array of needs.

Our Advantages
We are dedicated to continually advancing our international trade, offering bespoke services to pipeline dealers worldwide. Our investment in state-of-the-art machinery and professional equipment enables us to maintain a modern, efficient factory with an impressive annual output of 30,000 tons, capable of filling 3000 containers.
By leveraging superior machinery and an impeccable management system, we achieve cost reduction, expedited delivery times, and unwavering product quality assurance, ensuring excellence in every item we produce.

FAQ

 

Are you a trading company or a factory?

We are a professional manufacturer, and we warmly welcome you to visit our factory at your convenience.

How long is your delivery time? For small quantity products, they will be delivered to you by international courier (DHL, FedEx, TNT, etc.) or by air. Usually, it will take 3-5 days for you to receive the goods after they are dispatched. For large quantity products, they will be delivered by sea. The delivery time will range from days to weeks, depending on the destination port.

Can you provide samples?

Yes, samples are available. For standard products, samples are free of charge; you only need to cover the freight cost. For high-value products, you must pay both the freight and a certain product cost. After multiple orders or if you become a VIP customer, we will provide free samples whenever you need them.

Do you supply OEM services?

Yes, we offer OEM services based on your requirements, including logos, packaging, and more.

What are your terms of payment?

We accept TT or L/C at sight. For TT, a 30% advance payment is required, with the balance payable before shipment. Alternatively, payment can be made via L/C.

What is your MOQ?

Our MOQ is based on customers' requests.

Is it possible to use my appointed label or package?

Yes, we can use your specified label or packaging according to your requirements.

How can you guarantee the goods you offer are qualified?

We firmly believe that honesty and responsibility form the foundation of our company. Therefore, all products we provide are qualified. We test the goods and provide a Certificate of Analysis (COA) before delivery to ensure quality.