Premium PVC Conduit for Wiring

• After-sales Service: Online After-Sales Service
• Warranty: 1 Year
• Material: PP
• Water Absorption: ＜0.01%
• Contraction Percentage: ＜0.4%
• Ring Stiffness: Sn24, Sn32, Sn40
• Model NO.: DN100mm-250mm
• Density: 0.90-0.94
• Flattening Test: When The Deformation in The Vertical Direction of
• Bending Strength: ≥36 MPa
• Colour: to Be Agreed Upon by Supply and Demand
• Link Mode: It Is Connected by Hot Melt Butt
• Transport Package: Customized According to Customer Requirements
• Specification: According to the customer can be customized
• Trademark: Wilvida
• Origin: Jiangsu, China
• HS Code: 3917210000
• Production Capacity: 100, 000t/Year

Product Description

Product Description

Our MPP Power Pipe, crafted from superior modified polypropylene, revolutionizes how you approach construction by allowing for subterranean installations without the need for disruptive dredging or road surface excavation. This innovative solution is ideal for laying pipelines, cables, and other infrastructure in challenging environments such as roads, railways, buildings, and river beds.

Compared to the conventional 'digging method,' our trenchless pipe engineering is a paragon of environmental stewardship. It mitigates the adverse effects of traditional construction, such as dust emissions and traffic congestion. This cutting-edge technology is perfect for non-intrusive pipeline installations in sensitive areas, including Heritage Conservation Districts, bustling downtown areas, protected farmlands, highways, and riverbeds.

Boasting exceptional features such as high strength, superior high-temperature resistance, straightforward installation, and cost-effective construction, our MPP Power Pipe stands out as an unparalleled choice for your piping needs.

Detailed Photos

Product Parameters

MPP Cable Conduit Pipe's Parameter Datas
Norminal Diameter/IN(mm)	Norminal Wall Thickness (mm)			Norminal Lenght (mm)
	Ring Stiffness (3%) Grade (Normal Temperature)
	SN24	SN32	SN40
100	8	8	10	6000/9000
125	8	10	12
150	10	12	14
175	12	14	16
200	14	16	18
225	16	18	20
250	18	20	20

Certifications

Packaging & Shipping

Installation Instructions

In the installation process of MPP power cable protection tube, the connection method is a very important part. The correct selection of the appropriate connection method can ensure the reliable operation of the power piping system. This section introduces several common MPP power cable protection tube connection methods to help you understand the characteristics and application scenarios of each method.

01,Before installation, check whether the power supply, hydraulic oil, and heating plate of the welding machine meet the welding requirements; Conduct an empty car test run on the milling cutter oil pump switch, etc; Install the slips that match the specifications of the pipe into the rack; Set the temperature of the heating plate to the welding temperature, and before heating, wipe the surface of the heating plate with clean soft paper or alcohol to clean its oil stains.

02,Remove dirt from both ends of the pipe. Place the pipe into the frame clamp so that the length of the extension at both ends is equal. The parts outside the pipe rack should be supported by supports. Place the pipe at the same height as the centerline of the frame, and then secure the slip. Insert a milling cutter and mill the pipe.

03,After milling the pipe until continuous cutting occurs at both ends of the pipe, remove the pressure and let the milling cutter idle for two or three weeks before retracting the movable frame and turning off the milling cutter switch.

04,Take out the milling cutter and close the pipes at both ends. Check the end face, and the displacement of both ends of the pipe should not exceed 10% of the pipe wall thickness. When closing, there should be no obvious gap between the two end faces of the pipe, and the gap width should comply with: 0.3MM (DN<25MM); If 0.5MM (225MM400MM) does not meet the requirements, it should be milled again.

05,When the temperature of the heating plate reaches the set value, quickly place it into the rack and apply the specified pressure until the circumference of the pipe ends is flipped and the minimum curling reaches the specified height. Reduce the pressure to the specified value, so that the end face of the pipe is in contact with the heating plate, and continue heating until the specified time.

06,When the heat absorption time reaches the specified value, retract the movable frame and quickly remove the heating plate. Close the two pipe ends, and the switching time should be as short as possible, not exceeding the specified value. The closing pressure should not be too high, otherwise it will squeeze out the molten material and cause a decrease in welding quality.

07,Raise the pressure to the specified value and maintain pressure for cooling. After natural cooling to room temperature, release the pressure, loosen the slip, remove the pipe, and complete the welding.

Company Profile

Founded in 2018 in Yangzhou, China, Yangzhou Huawei Pipe Technology Co., Ltd. is a pioneering force dedicated to delivering comprehensive and intelligent pipeline system solutions.
Our extensive product lineup includes HDPE, PVC, PP-R, MPP, and many more, catering to a diverse range of applications in construction engineering, municipal projects, agricultural drainage and irrigation, gas transportation, home decoration, power cable sheathing, and beyond. We offer an impressive selection of nearly 3,000 different pipe, fitting, and valve products, each crafted to meet the highest standards.

Our Advantages
Committed to excellence in international trade, we provide global pipeline dealers with tailored services. To support a state-of-the-art manufacturing facility, we have invested extensively in specialized mechanical equipment, enabling us to achieve an annual output of 30,000 tons, which translates to filling approximately 3,000 containers.
Our advanced machinery and impeccable management system allow us to minimize costs, accelerate delivery times, and guarantee the superior quality of every single product.

FAQ

Are you a trading company or a factory?

We are a professional manufacturer, and you are warmly invited to visit our factory at your convenience.

How long is your delivery time? For small quantity orders, products will be delivered via international courier (DHL, FedEx, TNT, etc.) or by air, typically arriving in 3-5 days post-dispatch. For large quantity orders, delivery will be by sea, with transit times varying from days to weeks, depending on your destination port.

Can you provide samples?

Yes, samples are available. For standard products, samples are complimentary; you only cover the freight. For high-value products, you bear the freight and a nominal product cost. Once we establish a steady partnership or you become a VIP customer, we will offer free samples upon request.

Do you supply OEM service?

Yes, we provide OEM services tailored to your requests, including logo and packaging customization.

What are your terms of payment?

We accept T/T or L/C at sight. A 30% advance via T/T is required, with the balance due before shipment or by L/C.

What is your MOQ?

We cater to customers' specific requests for MOQ.

Is it possible to use my appointed label or package?

Yes, we can use your specified label or packaging as per your requirements.

How can you guarantee that the goods you offer are qualified?

We hold honesty and responsibility as our core values. Therefore, all products provided are guaranteed to be of high quality. We conduct thorough testing and provide a Certificate of Analysis (COA) before delivery.