Compact Electric Power PVC Tube

• Customization: Available
• After-sales Service: Online After-Sales Service
• Warranty: 1 Year
• Model NO.: DN100mm-250mm
• Material: PP
• Water Absorption: ＜0.01%
• Contraction Percentage: ＜0.4%
• Ring Stiffness: Sn24, Sn32, Sn40
• Density: 0.90-0.94
• Flattening Test: When The Deformation in The Vertical Direction of
• Bending Strength: ≥36 MPa
• Colour: to Be Agreed Upon by Supply and Demand
• Link Mode: It Is Connected by Hot Melt Butt
• Transport Package: Customized According to Customer Requirements
• Specification: According to the customer can be customized
• Trademark: Wilvida
• Origin: Jiangsu, China
• HS Code: 3917210000
• Production Capacity: 100, 000t/Year

Product Description

Product Description

 

The MPP power pipe stands at the forefront of modern engineering by utilizing modified polypropylene as its primary material. This advanced solution eliminates the need for dredging, digging, or disturbing road surfaces, making it ideal for laying pipelines and cables in critical and sensitive areas such as roads, railways, buildings, and riverbeds.

Trenchless pipe engineering, a marvel compared to the traditional digging methods, seamlessly aligns with stringent environmental protection standards. Unlike conventional construction that disrupts with dust, traffic congestion, and other nuisances, this innovative technology allows for non-invasive excavation in sensitive zones like heritage conservation districts, bustling downtown areas, protected farmland, highways, and rivers.

Boasting a myriad of benefits, this product excels with high strength and superior high-temperature resistance. Its installation process is straightforward, making construction effortless and cost-effective.

Detailed Photos

 

 

Product Parameters

 

MPP Cable Conduit Pipe's Parameter Datas
Norminal Diameter/IN(mm)	Norminal Wall Thickness (mm)			Norminal Lenght (mm)
	Ring Stiffness (3%) Grade (Normal Temperature)
	SN24	SN32	SN40
100	8	8	10	6000/9000
125	8	10	12
150	10	12	14
175	12	14	16
200	14	16	18
225	16	18	20
250	18	20	20

 

Certifications

 

 

 

Packaging & Shipping

 

 

Installation Instructions

 

In the installation process of MPP power cable protection tube, the connection method is a very important part. The correct selection of the appropriate connection method can ensure the reliable operation of the power piping system. This section introduces several common MPP power cable protection tube connection methods to help you understand the characteristics and application scenarios of each method.

01,Before installation, check whether the power supply, hydraulic oil, and heating plate of the welding machine meet the welding requirements; Conduct an empty car test run on the milling cutter oil pump switch, etc; Install the slips that match the specifications of the pipe into the rack; Set the temperature of the heating plate to the welding temperature, and before heating, wipe the surface of the heating plate with clean soft paper or alcohol to clean its oil stains.

02,Remove dirt from both ends of the pipe. Place the pipe into the frame clamp so that the length of the extension at both ends is equal. The parts outside the pipe rack should be supported by supports. Place the pipe at the same height as the centerline of the frame, and then secure the slip. Insert a milling cutter and mill the pipe.

03,After milling the pipe until continuous cutting occurs at both ends of the pipe, remove the pressure and let the milling cutter idle for two or three weeks before retracting the movable frame and turning off the milling cutter switch.

 

04,Take out the milling cutter and close the pipes at both ends. Check the end face, and the displacement of both ends of the pipe should not exceed 10% of the pipe wall thickness. When closing, there should be no obvious gap between the two end faces of the pipe, and the gap width should comply with: 0.3MM (DN<25MM); If 0.5MM (225MM400MM) does not meet the requirements, it should be milled again.

05,When the temperature of the heating plate reaches the set value, quickly place it into the rack and apply the specified pressure until the circumference of the pipe ends is flipped and the minimum curling reaches the specified height. Reduce the pressure to the specified value, so that the end face of the pipe is in contact with the heating plate, and continue heating until the specified time.

06,When the heat absorption time reaches the specified value, retract the movable frame and quickly remove the heating plate. Close the two pipe ends, and the switching time should be as short as possible, not exceeding the specified value. The closing pressure should not be too high, otherwise it will squeeze out the molten material and cause a decrease in welding quality.

07,Raise the pressure to the specified value and maintain pressure for cooling. After natural cooling to room temperature, release the pressure, loosen the slip, remove the pipe, and complete the welding.

 

Company Profile

 

Yangzhou Huawei Pipe Technology Co., Ltd., founded in the vibrant city of Yangzhou, China, in 2018, is steadfastly committed to delivering cutting-edge, all-encompassing intelligent pipeline system solutions.
Our extensive product line features HDPE, PVC, PP-R, MPP, and more, each designed to meet the diverse needs of construction engineering, municipal projects, agricultural drainage and irrigation, gas transportation, home decoration, and power cable sheathing. With nearly 3000 unique varieties and specifications of pipes, fittings, and valve products, we cater to a broad spectrum of applications.

Our Advantages
We are dedicated to fostering international trade, providing pipeline dealers from across the globe with tailored services. To support our vision of a modern manufacturing facility, we invest in state-of-the-art mechanical equipment. Our impressive annual output reaches 30,000 tons, efficiently filling up to 3000 containers.
Our top-tier machinery and impeccable management systems enable us to reduce costs, expedite delivery times, and ensure superior quality in every product we produce.

FAQ

 

Are you a trading company or a factory?

We are a professional manufacturer and would love to welcome you to visit our state-of-the-art factory at your convenience.

What is your delivery timeframe? For small quantity orders, products will be expedited via international courier services such as DHL, FedEx, or TNT. Typically, delivery takes about 3-5 days after dispatch. For larger volume orders, we ship by sea, with transit times varying from days to weeks depending on the destination port.

Can you provide product samples?

Absolutely, we offer samples! For standard products, samples are free, and you only need to cover the shipping costs. For high-value items, both the sample cost and shipping will be charged. However, once we establish a regular partnership or if you become a VIP customer, free samples will be provided as needed.

Do you offer OEM services?

Yes, we provide OEM services tailored to your specifications, including custom logos and packaging.

What are your payment terms?

We accept TT or L/C at sight. Payment terms are T/T 30% in advance, with the balance due before shipment, or by L/C.

What is your Minimum Order Quantity (MOQ)?

Our MOQ is flexible and can be adjusted according to your requirements.

Can I use my own label or packaging?

Yes, we can accommodate your labeling and packaging preferences upon request.

How do you ensure the quality of your products?

Integrity and accountability are the cornerstones of our business. Every product we supply meets stringent quality standards. We perform thorough testing and provide a Certificate of Analysis (COA) before delivery to guarantee quality.