Mpp Electric Pipe with Sn24 Ring Stiffness

• Customization: Available
• After-sales Service: Online After-Sales Service
• Warranty: 1 Year
• Model NO.: DN100mm-250mm
• Material: PP
• Water Absorption: ＜0.01%
• Contraction Percentage: ＜0.4%
• Ring Stiffness: Sn24, Sn32, Sn40
• Density: 0.90-0.94
• Flattening Test: When The Deformation in The Vertical Direction of
• Bending Strength: ≥36 MPa
• Colour: to Be Agreed Upon by Supply and Demand
• Link Mode: It Is Connected by Hot Melt Butt
• Transport Package: Customized According to Customer Requirements
• Specification: According to the customer can be customized
• Trademark: Wilvida
• Origin: Jiangsu, China
• HS Code: 3917210000
• Production Capacity: 100, 000t/Year

Product Description

Product Description

 

Introducing the MPP Electric Pipe with Sn24 Ring Stiffness, a marvel from Yangzhou Huawei Pipe Technology Co., Ltd. This innovative pipe utilizes modified polypropylene as its primary material, ensuring that you can lay pipelines and cables without the need for digging, dredging, or disrupting the road surface. Perfect for specialized sections such as roads, railways, buildings, and river beds, this product redefines efficiency and convenience in construction projects.

Compared to traditional methods, our trenchless pipe engineering meets modern environmental protection standards by avoiding the dust, traffic congestion, and other disruptions typical of conventional construction. This technology is especially advantageous in areas where excavation work is impractical or prohibited, such as heritage conservation districts, bustling downtowns, protected farmland, highways, and rivers.

Our MPP Electric Pipe offers numerous benefits including high strength, excellent high-temperature resistance, easy installation, convenient construction, and cost-efficiency. Experience the future of pipeline engineering with this exceptional product.

Detailed Photos

 

 

Product Parameters

 

MPP Cable Conduit Pipe's Parameter Datas
Norminal Diameter/IN(mm)	Norminal Wall Thickness (mm)			Norminal Lenght (mm)
	Ring Stiffness (3%) Grade (Normal Temperature)
	SN24	SN32	SN40
100	8	8	10	6000/9000
125	8	10	12
150	10	12	14
175	12	14	16
200	14	16	18
225	16	18	20
250	18	20	20

 

Certifications

 

 

 

Packaging & Shipping

 

 

Installation Instructions

 

In the installation process of MPP power cable protection tube, the connection method is a very important part. The correct selection of the appropriate connection method can ensure the reliable operation of the power piping system. This section introduces several common MPP power cable protection tube connection methods to help you understand the characteristics and application scenarios of each method.

01,Before installation, check whether the power supply, hydraulic oil, and heating plate of the welding machine meet the welding requirements; Conduct an empty car test run on the milling cutter oil pump switch, etc; Install the slips that match the specifications of the pipe into the rack; Set the temperature of the heating plate to the welding temperature, and before heating, wipe the surface of the heating plate with clean soft paper or alcohol to clean its oil stains.

02,Remove dirt from both ends of the pipe. Place the pipe into the frame clamp so that the length of the extension at both ends is equal. The parts outside the pipe rack should be supported by supports. Place the pipe at the same height as the centerline of the frame, and then secure the slip. Insert a milling cutter and mill the pipe.

03,After milling the pipe until continuous cutting occurs at both ends of the pipe, remove the pressure and let the milling cutter idle for two or three weeks before retracting the movable frame and turning off the milling cutter switch.

 

04,Take out the milling cutter and close the pipes at both ends. Check the end face, and the displacement of both ends of the pipe should not exceed 10% of the pipe wall thickness. When closing, there should be no obvious gap between the two end faces of the pipe, and the gap width should comply with: 0.3MM (DN<25MM); If 0.5MM (225MM400MM) does not meet the requirements, it should be milled again.

05,When the temperature of the heating plate reaches the set value, quickly place it into the rack and apply the specified pressure until the circumference of the pipe ends is flipped and the minimum curling reaches the specified height. Reduce the pressure to the specified value, so that the end face of the pipe is in contact with the heating plate, and continue heating until the specified time.

06,When the heat absorption time reaches the specified value, retract the movable frame and quickly remove the heating plate. Close the two pipe ends, and the switching time should be as short as possible, not exceeding the specified value. The closing pressure should not be too high, otherwise it will squeeze out the molten material and cause a decrease in welding quality.

07,Raise the pressure to the specified value and maintain pressure for cooling. After natural cooling to room temperature, release the pressure, loosen the slip, remove the pipe, and complete the welding.

 

Company Profile

 

Yangzhou Huawei Pipe Technology Co., Ltd., founded in the historic city of Yangzhou in 2018, is committed to delivering comprehensive, intelligent pipeline system solutions.
Our diverse product portfolio includes HDPE, PVC, PP-R, MPP, and numerous other series, extensively utilized in construction engineering, municipal projects, agricultural drainage and irrigation, gas transportation, home decoration, power cable sheathing, and more. We proudly offer nearly 3000 different varieties and specifications of pipes, fittings, and valve products.

Our Advantages
With a relentless focus on international trade, we provide customized services to pipeline dealers worldwide. Investing in state-of-the-art mechanical equipment, we have established a modern factory with an impressive annual output of 30,000 tons, capable of filling 3000 containers.
Our exceptional machinery and sophisticated management system allow us to minimize costs, reduce delivery times, and guarantee the unparalleled quality of each product.

FAQ

 

Are you a trading company or a factory?

We are a distinguished manufacturer. We warmly invite you to visit our state-of-the-art facility at your convenience.

What is your delivery time frame? For small quantity orders, we dispatch via international couriers such as DHL, FedEx, and TNT, or by air. Typically, delivery takes 3-5 days. For larger orders, we ship by sea, taking several days to weeks to reach your destination port, depending on the port's location.

Can you provide samples?

Absolutely, we offer samples. Standard product samples are complimentary; you only cover the shipping costs. For premium products, both the sample and shipping costs apply. Frequent partners or VIP clients enjoy complimentary samples as needed.

Do you offer OEM services?

Indeed, we provide OEM services tailored to your requirements, including customized logos and packaging.

What are your terms of payment?

We accept TT or L/C at sight. Typically, T/T 30% in advance with the balance before shipment or via L/C.

What is your Minimum Order Quantity (MOQ)?

Our MOQ is flexible and based on customer requests.

Is it possible to use my designated label or packaging?

Yes, we can accommodate your specific label or packaging requirements.

How do you ensure the quality of your products?

We uphold honesty and responsibility as our core values. All products undergo rigorous testing and come with a Certificate of Analysis (COA) to ensure they meet our high standards before delivery.